YAQIN MS-12B Tube Phono Stage Pre-AMP MM RIAA Turntable
Hỗ Trợ Nâng Cấp Miễn Phí
Hỗ trợ đổi sang mã khác trong 15 ngày đầu mà không mất bất cứ chi phí nào.
Thanh Toán Khi Nhận Hàng
Tất cả các đơn đặt hàng đều thanh toán trực tiếp tại địa nhận hàng.
Liên Hệ Tư Vấn
Tư vấn 1: 0986 673 473
Tư vấn 2: 0975 879 985 [Zalo]
Add: P2101, Tòa A, Star Tower 283 Khương Trung, Hà Nội
The main factors affect the sound quality of vacuum tube amplifier
1. Single-ended and push-pull circuit
At the end of the power amplification, amplification of push-pull is easier to get high power output, because push-pull is a vacuum tube amplifier “+” signal, a vacuum tube amplifier “-” signal, and then superimposed, so large distortion. Single-ended amplifier is a vacuum tube amplifier “+, -” signal, does not need the signal superposition, therefore less distortion. The sound Single-ended than push-pull good, especially in some minor details. However, Single-ended is difficult to obtain high power output, with vacuum tubes of the same type, Single-ended can do 10W, while push-pull is easy to do 30W, Single-ended to obtain large power will have to pay more price.
2. push-pull end power amplifier of vacuum tube different connections
push-pull the end of the power amplifying vacuum tube usually have three connections: triode form, super linear form and standard form. Theoretically speaking, the triode form by minimum distortion, output power is minimum; standard form get larger distortion, power is also the maximum; between super linear form between.
3. Affect the power transformer and output transformer of sound
High quality vacuum tube amplifier inseparable quality transformers, power transformers currently technically no trouble, the output transformer is the decision of the vacuum tube amplifier sound quality is the key. Because regardless of the output transformer selection is good, how sophisticated technology, both methods exist to avoid leakage inductance and stray capacitance components, resulting phase distortion. Output transformer as inductive element, to the transmission signals of different frequencies have different inductance. Therefore, the output of the transformer will be different in different voices lead. No high-quality output transformer, other aspects of the production of better quality vacuum tube amplifier is also meaningless.
1. Ability to use with CD/DVD player as a preamplifier and with MM cartridge turntable as a phono stage;
2. Dual stereo outputs either 0.7V for a post stage amplifier or 0.25V for an integrated amplifier. It can be applied to bi-amp configuration;
3. Employ DC filaments power supply to minimize humming noise;
4. Adopts conventional active RIAA equalization in phono stage circuit;
5. Power transformers manufactured with silicon steel sheet and high quality oxygen-free enameled copper wire;
Tubes:12AX7 × 2(Phono voltage amplifier)
12AU7 × 2(Voltage amplifier)
Output Voltages: Dual outputs of either 0.25V or 0.7V
0.25V (for integrated amplifier)
0.7V (for power amplifier or second gear)
Distortion of Harmonic Wave: ≤0.2% (Preamplifier)
≤0.5% (Phono stage)
Frequency Response: 15Hz ~ 100KHz (-2.0dB)
Signal-to-Noise Ratio: >75dB (CD/DVD input 0.5V 1KHz, output 0.7V)
>65dB (Phono input 10mV 1KHz, output 0.7V)
Supply Voltage: AC115V 60Hz
Weight: 3.0kg (7.7lb)
Dimension: 17cm(W) x 38cm(D) x 16cm(H)
Shipping Weight: 4.6kg (10lb)
Shipping Dimension: 45cm x 25cm x 23cm
Thông tin bổ sung
|Place of Origin||
17cm(W) x 38cm(D) x 16cm(H)
|Distortion of Harmonic Wave||
15Hz ~ 100KHz (-2.0dB)